Skip to content
Ashburn Lock & Key Co.Request a visit
Open 24/7(289) 278-0778Call now
Illustrative locksmith scene

Plan ahead High security · Whitby

High Security Locks

After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws. Nobody got in, but you have looked at that door differently every evening since.

Call now · open 24/7(289) 278-0778

Request a visit

In plain words

Think of the upgrade as four layers working together. The cylinder resists picking, bumping and drilling. The deadbolt resists sawing and kicking with a long, hardened bolt. The strike and screws keep the frame from splitting when the door is struck. And the key control stops copies being made without your say-so. A locksmith assesses your door for each layer and tells you where it is weak, because a strong cylinder screwed into a soft frame gains you little. Most homes end up with a graded deadbolt and a patented cylinder; businesses often step up to laboratory-rated cylinders and heavier lock bodies.

Sound familiar?

A colleague showed you a video of a lock being opened with a bump key in a few seconds. Then you went home and noticed your own deadbolt is the same style, bought at a hardware store a decade ago.

How the visit goes

High Security Locks · Whitby

How the visit goes

Illustrative locksmith scene
  1. 1

    Reading the cylinder you have now

    The existing cylinder tells the locksmith a great deal. A standard pin tumbler with an open keyway can be picked, bumped and duplicated by anyone with the blank. Worn pins let a key that is not quite right jiggle it open. A cylinder that spins loosely in its housing or shows a scratched face has been attacked or simply worn out. The locksmith identifies the format, whether key-in-knob, rim, mortise or interchangeable core, because that determines which high-security cylinders will drop into your present hardware and which will need a new lock body altogether.

  2. 2

    Setting up controlled keys

    The key system is registered to you before the first key is cut. The locksmith records the system, the authorised signatories and the number of keys issued, and hands you the authorisation card or online validation details. Every key is cut from code rather than copied, because the angled cuts or side milling must be exact for the sidebar to release. Extra keys later are ordered by an authorised person and logged, and blanks are not sold outside the manufacturer's network. This is what makes a key stop being a thing anyone can duplicate at a kiosk.

  3. 3

    Ordering keys the right way

    Extra keys are now a small procedure rather than an errand. An authorised person contacts the locksmith, the request is checked against the system record, and the key is cut from code so it works as cleanly as the first. New keys are numbered and added to the register. Businesses often issue keys against a signature and collect them when someone leaves, which the register makes simple. Homeowners typically keep two or three spare keys and hold onto the authorisation card. A key cut from a worn copy would not release the sidebar properly, which is one more reason the code route is the only route.

In the van

  • Box strike
  • Patented key blanks
  • Code key cutting machine
  • Pinning kit and plug follower
  • Graded deadbolt with hardened bolt

What affects the quote

  1. 1

    Master keying

    Arranging staff keys, area keys and a manager key on one system takes bench time to plan and pin, and the more levels you want, the more careful that planning is.

  2. 2

    Key control level

    A patented keyway with authorisation cards covers most homes. Geographically exclusive keyways and signature-controlled systems for businesses carry registration and administration that show in the quote.

  3. 3

    Glass near the lock

    Sidelights or glazed panels beside the deadbolt may call for a different function or extra hardware to keep the inside turn out of reach, always keeping easy exit in view.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 278-0778

High Security Locks: questions

Advice · (289) 278-0778

Why does the locksmith care so much about the strike plate?

Because that is where a kicked door fails. The bolt is strong, but it sits in a pocket in the jamb held by a thin plate and short screws, and a boot splits the wood around it. A reinforced strike or box strike fastened with three-inch screws into the wall framing spreads the blow along the frame. It is the least visible part of the upgrade and often the one that does the most.

What is bumping, and does this stop it?

Bumping uses a specially cut key that is struck while under light turning pressure, bouncing the pins to the shear line for an instant so an ordinary cylinder opens. It works on many standard pin tumblers. A high security cylinder needs its sidebar released by separately positioned finger or rotating pins at the same moment, and a bump key cannot set those, so the plug stays locked. It is one of the clearest advantages of the upgrade.

What should I do when a controlled key is lost?

Tell your locksmith so the register is updated, then decide together what the loss means. If the key was lost with nothing identifying your address, the practical risk is low and many people simply strike it off. If it went missing with identification or from a known person, the affected cylinders can be repinned so that key stops working while the rest of the system continues. Because the keyway is controlled, you know that no further copies exist.

Durham, Ontario

Whitby information

Town
Whitby, Durham, Ontario
In business
13 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

25%

Newer homes. About 25% of homes in Whitby were built in 1980 or earlier, according to the 2021 Census.

Recent builds often have steel or fibreglass entry doors rather than solid wood. They resist warping and take hardware well, and a locksmith fitting a deadbolt or reinforced strike works with the door's construction so screws bite into something solid.

70%

Mostly houses. Single-detached houses make up about 70% of homes in Whitby (2021 Census).

A detached house gives a locksmith room to work: full access to both sides of every door, hinges and frames included. Repairs and upgrades can be thorough, from the front deadbolt to the gate latch, with nothing off limits.

Source: Statistics Canada, 2021 Census of Population

Open Whitby in Google Maps

Open 24/7

Request a visit

After the attempted break-in the police officer pointed at your door and said the strike plate was held by two short screws.

Call now · open 24/7(289) 278-0778
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 13 years in business